Starke Yacht Care
Starke Hyper Hold Pro SiO2 Polymer Sealant
Couldn't load pickup availability
Hyper Hold Pro is a powerful crème based polymer that uses sophisticated SiO2 resins and UV blockers to lock on and protect your marine paint or gelcoat from extreme UV. Down in the hot Florida sun we've seen up to 3-6 months of durability on average. Hyper Hold Pro is extremely easy to use. Residual removal of the product is a breeze. The formula can be applied in warm and cold climates.
We recommend laying down a thin coat of Hyper Hold Pro with a DA polisher and foam pad on speed 1/2. The thinner you can lay the coat, the easier it will be to remove by hand with a microfiber. When you tend to apply by hand with an applicator, the material will lay down more thick and become more difficult to remove by hand.
Instructions
Instructions
1. Shake well before using.
2. Apply a 1” dab of Starke Level R Compound for a 1.5’ x 1.5’ section and spread with the cutting pad.
3. Buff at a speed between 900 to 1,200 rpm.
4. Work the buffer slowly form side to side and front to back until most of the product is gone and gloss appears.
5. Repeat if necessary until scratches are removed.
Wipe surface clean with a microfiber cloth.
